EVO SBC

The most compact spray cleaning system for stencils on the market

The process chains of the electronics industry are designed for the highest precision. Thanks to intelligent features, the EVO SBC fits seamlessly into these processes. Stencil cleaning systems, which are tailored to the requirements of the industry in every respect, are produced in our factory to order and by incorporating numerous manual work steps. Housing, internals and piping of the EVO SBC are made of stainless steel. The design meets the highest demands – even beyond functionality.

Advantages of the stencil cleaning system EVO SBC

 Quick Economical Compact Smart

EVO SBC

SLIMLINE construction

Where slim dimensions have real size.

When implementing the device peripherals in electronics production, not an inch is usually wasted. We know that. That’s why we have placed great emphasis on the most compact dimensions when developing the EVOLUTION series. As a result, the stencil cleaning machine EVO SBC requires a footprint of only 0.8 m² — and that, with integrated drip tray.

This means that it offers one thing above all else: maximum performance in the smallest possible space.

Width 600 mm
Depth 1345 mm
Height 1980 mm
Weight approx. 400 kg
Stencil size up to 1000 × 1000 × 40 mm

 

 

öko effizienteconomical & sustainable

Works economically. And is good for the environment.

Sustainability is not our choise, protecting the environment and resources is our duty. For this reason, we have consistently put all processes that cause energy costs and burden the environment to the test. The development work has paid off. The results are innovative solutions that make the EVO SBC work more efficiently than other stencil cleaning machines on the market. Due to the significantly shortened process times, the EVO SBC ultimately also consumes significantly less energy. Also in this point the EVOLUTION series is the right decision — and your energy cost balance is no longer a big issue.

This makes EVO stencil cleaning so economical and efficient:

Eco system

  • Environmentally friendly, closed loop system
  • Proven short process times and low consumption values (water / cleaner / energy)
  • System operates completely without compressed air
     

Defogger

  • Accelerated drying through dehumidification of the washing chamber and optimised consumption values through condensate
  • No connection to an external extraction system necessary
     

SSP start-stop positioning

  • Horizontal movement of the washing and drying unit adjustable to the respective stencil size – saves time and resources
  • Further optimisation is possible with the SNA “Selective-Nozzle-Actuation” option
EVO SBC

EVO SBC expansion stages

Choose in accordance with your requirements.

Our cleaning machine EVO SBC is available in four expansion stages. That’s good – because that way you decide to what extent you want to use the EVO stencil cleaning system in the long term. So you have the choice and receive a machine system which is adapted to your requirements.

        

Cleaning of stencils

  • 1-tank system
  • 2-step process (wash / dry)

 

Cleaning of stencils and misprints with reproducible, smear-free drying

  • 1-tank system with deionised water supply
  • 3-step process (wash / rinse with deionised water / dry)

 

Cleaning of stencils with low smear drying

  • 2-tank system
  • 3-step process  (wash / rinse with medium from tank 2 / dry)

 

Cleaning of stencils, assemblies and misprints with reproducible, smear-free drying

  • 2-tank system heated (tank 2 additionally with deionised flow heater)
  • 4-step process (wash / rinse from tank 2 / rinse with deionised water to discard / dry)

 

EVO SBC

Extra Features

Comfortable handling is not an option. It is a must.

We know the requirements for optimal cleaning processes in the electronics industry. And we know what the process periphery looks like on site. Based on this knowledge, we have equipped the stencil cleaning system EVO SBC with details as standard, which increase both safety and convenience during handling.

More safety, more handling convenience:

Glass door with automatic locking
The cleaning process takes place in front of your eyes, the side panel with safety glass viewing window makes it possible.

Wash chamber interior lighting
Nothing escapes you. Even with limited ambient light, every cleaning step is visually traceable.

All-round LED status indicator
The dimmable indicator light below the top of the housing ensures visibility from a long distance. Your employees can thus see at all times whether the cleaning process is running smoothly.

Touch display
The integrated 7” colour display with touch screen is embedded flat in the system housing. The glass display can be operated with gloves.

Ergonomic design
The system can — depending on the device periphery — also be operated while seated. In this way, EVO SBC supports accessibility at the workplace and can in many cases be subsidised by the employers’ liability insurance associatio.

EVO SBC

Smart Control Panel

Optimally networked. More possibilities.

The EVO SBC brings stencil cleaning to a completely new level of precision and safety. An essential component is the smart system control, which can be easily integrated into existing company networks. Cleaning status, operating status and availability can thus also be called up decentrally. Even remote maintenance is – if desired – simply possible.

  • 10 wash programmes can be stored
  • 3 programme levels with password protection (operator / supervisor / service)
  • Intuitive menu navigation
  • Plain text error outputs
  • Connectivity: Ethernet RJ 45 / WLAN
  • Features and technical details

    MOST IMPORTANT FEATURES

    SLC Slim-Line Construction

    Design-oriented, ergonomic design with extremely small footprint.
    With dimensions (H) 1980 × (W) 600 × (D) 1345 mm (0.8 m2), the EVO SBC is the spray cleaning system for stencils with an especially small footprint.
    The base tray is integrated into the housing construction!

    Eco-System

    Environmentally friendly, closed loop system.
    Proven shortest process times and consumption values (water / cleaner)
    System operates completely without compressed air, therefore low operating costs!

    Defogger

    Accelerated drying through dehumidification of the washing chamber and optimised consumption values through condensate recovery. No connection to external air suction necessary!

    SSP Start-Stop-Positioning

    Horizontal movement of the washing and drying unit adjustable to the respective stencil size – saves time and resources.
    Further optimisation is possible with the option SNA “Selective nozzle control”.

    High-Efficiency-Drying

    Highly efficient drying process enables shortest drying times.

    PPC Pump-Pressure-Control

    The spraying pressure can be regulated in the range from 0 to 3.5 bar. Protects sensitive stencils and assemblies.

    FPC Fan pressure control

    The blower pressure can be regulated in the range from 0 to 235 m3/h. Protects sensitive stencils and assemblies.

    Further equipment features

    • Housing, internals and piping completely made of stainless steel

    • Glass door with automatic locking

    • Side panel with large viewing window made of safety glass

    • LED interior lighting of the washing chamber

    • RGB LED status indicator, all-round, below top of housing

    • Integrated base tray – holds all process liquids from both tank systems

    • Control: Eaton SPS – user-friendly, intuitive menu navigation and programming with plain text error output

    • 7” colour touch screen with chemical-resistant glass surface that can be operated with gloves

    • 10 washing programmes can be stored

    • 3 programme levels with password protection (operator / supervisor / service)

    • Connectivity: Ethernet RJ 45 / Wireless Lan

    • Remote maintenance possible

    • Optimised for MPC® cleaning media

    Options

    Zestron-Eye

    Digital real-time concentration measurement.

    SNA Selectiv Nozzle Actuation

    Individual segments of the 3-part nozzle frame can be switched on or off as required.
    Water and cleaning agent are only sprayed in the required working area, the consumption of valuable resources is optimised.

    Accessories

    Single size holder 740 × 740 mm (29”)
    Multi-size holder for frameless stencils up to max. 1000 × 1000 mm (39.4”)
    Squeegee holder
    Holder for assemblies (PCBs)

    Customised holders can be manufactured.

     

    Technical data

    Technical data
    EVO SBC BASIC
    EVO SBC ADVANCED
    EVO SBC PRO
    EVO SBC PREMIUM
      1-Tank-System 1-Tank-System with DI-Water-Rinsing 2-Tank-System 2-Tank-System with DI-Water-Rinsing
    Technology Matthes EVOLUTION Matthes EVOLUTION Matthes EVOLUTION Matthes EVOLUTION
      Stencils / Screens / Squeegees Stencils / Screens / Squeegees / Misprints Stencils / Screens / Squeegees Stencils / Screens / Squeegees / Misprints / PCBs

    Capacity per process

    Stencils, Screens, up to effective 1000 × 1000 × 40 mm (39,4 × 39,4 × 1,6“)

    Stencils, Screens / PCB-Carrier up to effective 1000 × 1000 × 40 mm (39,4 × 39,4 × 1,6“)

    Stencils, Screens up to effective 1000 × 1000 × 40 mm (39,4 × 39,4 × 1,6“)

    Stencils, Screens / PCB-Carrier up to effective 1000 × 1000 × 40 mm (39,4 × 39,4 × 1,6“)

    Capacity Tank 1

    70 litres

    70 litres

    70 litres

    70 litres

    Capacity Tank 2

    —

    —

    20 litres

    20 litres

    Drip tray

    integrated
    90 litres

    integrated
    90 litres

    integrated
    90 litres

    integrated
    90 litres

    Power supply

    3PH 400V 16A CEE 50Hz PE/N

    3PH 400V 16A CEE 50Hz PE/N

    3PH 400V 16A CEE 50Hz PE/N

    3PH 400V 32A CEE 50Hz PE/N

    Power consumption

    4 kW

    4 kW

    4 kW

    22-31 kW

    Control system

    EATON SPS

    EATON SPS

    EATON SPS

    EATON SPS

    Heating capacity tank 1

    		 0–80 °C
    steplessly adjustable
    3 KW    		 0–80 °C
    steplessly adjustable
    3 KW

    0–80 °C
    steplessly adjustable
    3 KW

    		 0–80 °C
    steplessly adjustable
    3 KW

    Heating capacity tank 2

    —

    —

    —

    DI-water flow heater 20 — 60 °C
    18-27 kW

    Drying

    from 0 to 235 m³/h

    from 0 to 235 m³/h 

    from 0 to 235 m³/h 

    from 0 to 235 m³/h 

    Filter system wash tank

    Coarse filter (washing tank) with 25µ cartridge filter

    Coarse filter (washing tank) with 25µ cartridge filter

    Coarse filter (washing tank) with 25µ cartridge filter

    Coarse filter (washing tank) with 25µ cartridge filter

    Rinsing tank filter system

    —

    —

    Fine filter (rinsing tank) with 5µ cartridge filter

    Fine filter (rinsing tank) with 5µ cartridge filter

    Supply connection 1 (Tap water)

    —

    3/4” connection

    —

    3/4” connection

    Supply connection 2 (DI-Water)

    —

    3/4” connection

    —

    3/4” connection

    Supply connection 3  (compressed air)

    compressed air-free operation

    compressed air-free operation

    compressed air-free operation

    compressed air-free operation

    Drain connection (rinsing medium)

    X

    connection DN 50

    connection DN 50

    connection DN 50

    Exhaust connection

    Steam condenser

    Steam condenser

    Steam condenser

    Steam condenser

    Installation dimension

    D 1345 mm x W 600mm x H 1980 mm

    D 1345 mm x W 600mm x H 1980 mm

    D 1345 mm x W 600mm x H 1980 mm

    D 1345 mm x W 600mm x H 1980 mm

    Noise level
    EN ISO 3746

    < 65 dB(A)

    < 65 dB(A)

    < 65 dB(A)

    < 65 dB(A)

    Dry weight

    400 kg

    420 kg

    440 kg

    460 kg